Intro
A unison bend brings two notes together: one stays at its original pitch while the lower one bends upwards to meet it. The moving note gives you the excitement of a bend, and the stationary note gives your ear a clear target. The difficulty is keeping that target still while another finger moves a neighbouring string.
Begin with the notes separately rather than trying to make a large sound immediately. This lesson uses G-string fret seven, which is D, bent up a tone to E, alongside B-string fret five, which is E. Both notes finish at the same pitch. Use standard tuning and tune your guitar before judging the bend.
Check that an ordinary tone bend is comfortable
Play D at fret seven on the G string. Then play E at fret nine on the same string to hear the target. Return to fret seven and bend until you hear E. A full-tone bend raises the pitch by two semitones; it is not defined by a fixed distance that the string travels across the neck.
String gauge, scale length and guitar setup all affect the effort involved. If reaching the target needs an uncomfortable amount of force, do not add the second note yet. The beginner string-bending guide is the right place to establish a supported, controlled movement first.
Stop if you feel pain. Short attempts with breaks are more useful than repeated strained bends. If the technique remains uncomfortable, ask a teacher to check the movement and have the instrument's playability checked rather than assuming your fingers simply need to become stronger.
Find the stationary reference
Play the B string at fret five with your index finger. That note is E. Sound it on its own, let it ring briefly, then stop it. Put your ring finger at fret seven on the G string and play D without bending. Hear the difference before doing anything with both strings together.
The index finger will hold the B-string note while the ring finger bends the G string. Place the middle finger behind the ring finger on the G string as support where comfortable. You are asking those supporting fingers and the hand movement to share the work, not asking the ring fingertip to shove the string alone.
Keep the reference finger curved enough that it does not accidentally deaden the G string. The exact hand angle will vary, but the B string must ring cleanly without your index dragging sideways. Check that note again after placing the bending fingers. If it has already gone sharp, relax the fretting pressure.
Match the pitches one at a time
Play the E reference on the B string, stop it, then play the G-string D and bend it to E. Listen for the remembered target. Release silently, pause, and sound the reference again. Repeat a few times before trying to hold the two notes simultaneously.
A tuner can help check a single bent note, but your ear still needs to recognise the destination. Most ordinary tuners are less useful when two strings sound together. Compare one pitch at a time and avoid staring at a display while ignoring an awkward hand position.
Try singing the reference quietly before bending. You do not need a polished singing voice; you are checking whether you can hold the sound in mind. These guitar ear-training exercises develop that habit without turning each practice session into a theory test.
Sound the pair and keep one string still
Fret B five and G seven together. Pick just those two strings with a small controlled stroke, then bend the G string upwards towards the bass strings. Keep the B-string reference stationary. Approach the target slowly enough that you can hear the gap closing rather than overshooting and searching backwards.
When the pitches are close but not quite together, you may hear a pulsing or beating sound. Listen for that roughness to become less pronounced as they meet. Use the reference as an actual pitch guide, not simply another sound in the chord. Heavy gain can hide the detail, so start with a clean or lightly driven tone.
After the bend, sound the B string alone without changing your fretting position. It should still be E. If it is sharp, the index has moved or squeezed harder during the bend. Practise a smaller movement while watching that finger. Let it anchor the reference without gripping the whole neck tightly.
End the bend without an accidental fall
A bend includes its ending. If you let the G string fall back to D while it is still ringing, the listener hears that descent. Sometimes that is intentional, but for this exercise stop the strings before releasing the tension. This makes a clear contrast between matching the pitches and allowing them to separate again.
Use a light picking-hand touch to silence the pair, then return the G string to its starting position. Check that neither string rings as your fingers reset. Practise the silent release on its own if it is noisier than the bend.
Nearby strings can also get caught under the bending fingertip and sound during the return. The guide to muting unwanted string noise explains how the two hands can share that job. Choose a muting contact that does not prevent the reference string from ringing while you need it.
Give the movement a simple rhythm
Count four steady beats. Pick the pair on beat one, reach the target by beat two, hold through beat three and mute on beat four. Then take a complete bar off. The silent bar is a chance to release unnecessary tension and listen, not a cue to keep rehearsing the bend rapidly.
If reaching E by beat two makes you jerk the string, slow the pulse. Once the pitch arrives reliably, try reaching it a little sooner while preserving the same target. A quick bend should be a controlled version of the slow movement, not a separate uncontrolled shove.
Record several spaced attempts. Judge each one for the arrival pitch, the stability of the reference and the ending. Do not score it only by how dramatic it sounds. A quieter bend that reaches E without moving the B string is the more useful foundation.
Troubleshoot one problem at a time
- ❯ If the bend stays flat, compare against G-string fret nine again. Check support and hand movement before increasing force.
- ❯ If it overshoots, approach E more slowly and stop there briefly. Do not add vibrato while you are still locating the target.
- ❯ If the reference disappears, check whether the index or another finger is touching the B string accidentally.
- ❯ If both notes rise, practise sounding B five immediately before and after each attempt. Keep its finger pressure and position steady.
Two notes sounding together are a form of double stop, but the coordination here is more specific than simply holding a two-note shape. This introduction to guitar double stops is useful if picking only the intended pair is still difficult. Separate that picking task from the bending task when necessary.
Put one bend into a phrase
Play a short single-note idea, leave a beat of space, then use one unison bend as the final sound. Keep the bend at a similar volume to the notes before it. You do not need repeated bends or a new fret position to make the technique musical.
Leave enough silence afterwards to reset the hand completely. If the phrase makes your reference finger shift, return to the isolated pair before adding more notes. Moving the shape around the neck can wait until the original notes remain dependable.
Outro
Your first useful unison bend is G-string D at fret seven meeting the still E at B-string fret five, with a clean stop before release. Hear the target separately, support the movement and check the reference after each attempt.
Finish with a handful of comfortable, spaced repetitions rather than a long endurance drill. Accurate pitch and a stationary reference make this technique convincing; force and extra distortion cannot replace either.
If you've enjoyed this article, please share it!

Guitar Lessons In Leeds
Save time and learn faster with Mike. If you are based in Leeds, then I would be happy to help you to become your best at playing guitar.
Learn More
